Datasheet4U Logo Datasheet4U.com

LTC3217 - 600mA Low Noise Multi-LED Camera Light Charge Pump

General Description

The LTC®3217 is a low noise charge pump DC/DC converter designed to power four high current LEDs.

The LTC3217 requires only four small ceramic capacitors and two current set resistors to form a complete LED power supply and current controller.

Key Features

  • n Charge Pump Provides High Efficiency with Automatic Mode Switching n Multimode Operation: 1x, 1.5x, 2x n Four Low Dropout LED Outputs n Up to 600mA Total Output Current n Independent Torch and Flash ISET and Enable Pins n Low Noise Constant Frequency Operation.
  • n PWM Brightness Control via the EN2 Pin n Low Shutdown Current: 4μA n Internal Soft-Start Limits Inrush Current During Start-Up and Mode Switching n Open/Short LED Protection n No Inductors n (3mm x 3mm) 16-Lead QFN Plastic Package.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FEATURES n Charge Pump Provides High Efficiency with Automatic Mode Switching n Multimode Operation: 1x, 1.5x, 2x n Four Low Dropout LED Outputs n Up to 600mA Total Output Current n Independent Torch and Flash ISET and Enable Pins n Low Noise Constant Frequency Operation* n PWM Brightness Control via the EN2 Pin n Low Shutdown Current: 4μA n Internal Soft-Start Limits Inrush Current During Start-Up and Mode Switching n Open/Short LED Protection n No Inductors n (3mm x 3mm) 16-Lead QFN Plastic Package APPLICATIONS n Multi-LED Camera Light Supply for Cellphones/ DSCs/PDAs L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. *Protected by U.S. Patents including 6411531.