Datasheet4U Logo Datasheet4U.com

LTC3720 - Single Phase VRM8.5 Current Mode Step-Down Controller

Key Features

  • s 5-Bit Programmable Output Voltage: 1.05V to 1.825V (VRM8.5) s No Sense Resistor Required s 2% to 87% Duty Cycle at 200kHz s tON(MIN) ≤ 100ns s Supports Active Voltage Positioning s True Current Mode Control s Stable with Ceramic COUT s Dual N-Channel MOSFET Synchronous Drive s Power Good Output Voltage Monitor s Wide VIN Range: 4V to 36V s ±1% 0.8V Reference s Adjustable Current Limit s Adjustable Switching Frequency s Forced Continuous Control Pin s Programmable Soft-Start s Output Overvoltag.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTC3721-1 Push-Pull PWM Controller Linear
LTC3727LX-1 2-Phase Synchronous Step-Down Switching Regulator Linear
LTC3707-SYNC 2-Phase Synchronous Step-Down Switching Regulator Linear
LTC3708 (LTC3000 Series) SEVEN-SEGMENT NUMERIC LED DISPLAY LITE-ON Electronics
LTC3710 0.3 Four LED Clock Frequency Displays LITE-ON

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LTC3722-1 Phase Modulated Full Bridge Controllers
LTC3722-2 Phase Modulated Full Bridge Controllers
LTC3723-1 Synchronous Push-Pull PWM Controllers
LTC3723-2 Synchronous Push-Pull PWM Controllers
LTC3725 Single-Switch Forward Controller and Gate Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
U U LTC3720 Single Phase VRM8.5 Current Mode Step-Down Controller FEATURES s 5-Bit Programmable Output Voltage: 1.05V to 1.825V (VRM8.5) s No Sense Resistor Required s 2% to 87% Duty Cycle at 200kHz s tON(MIN) ≤ 100ns s Supports Active Voltage Positioning s True Current Mode Control s Stable with Ceramic COUT s Dual N-Channel MOSFET Synchronous Drive s Power Good Output Voltage Monitor s Wide VIN Range: 4V to 36V s ±1% 0.