LTC4210-3 Datasheet | Linear Technology

Features nn Allows Safe Board Insertion and Removal from a Live Backplane nn Adjustable Analog Current Limit with Circuit Breaker nn Fast Response Limits Peak Fault Current nn Automatic Retry or Latch Off On Current Fault nn Adjustable Supply Voltage Power-Up Rate nn High Side Drive for External MOSFET Switch nn Controls Supply Voltages from 2.7V to 7V nn Undervoltage Lockout nn Adjustable Overvoltage Protection nn Low Profile (1mm) SOT-23 (Thin SOT™) Package APPLICATIONS nn Hot Board Insertion nn Electronic Circuit Breaker nn Industrial High Side Switch/Circuit Breaker LTC4210-3/LTC4210-4 Hot Swap Controller in 6-Lead SOT-23 Package DESCRIPTION The LTC®4210-3/LTC4210-4 is a 6-pin SOT-23 Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. An internal high side switch driver controls the GATE of an external N-channel MOSFET for a supply voltage ranging from 2.7V to 7V. The LTC4210 provides the initial timing cycle and allows the GATE to be ramped up at an adjustable rate. The LTC4210 Features a fast current limit loop providing active current limiting together with a circuit breaker timer. The signal at the ON pin turns the part on and off and is also used for the reset function. The LTC4210-3 autoretries on overcurrent fault and the LTC4210-4 latches off on an overcurrent fault. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and Thin SOT is a trademark of Analog Devices, Inc. All other trademarks are the property of their respective owners. TYPICAL APPLICATION Single Channel 5V Hot Swap Controller BACKPLANE PCB EDGE CONNECTOR CONNECTOR (FEMALE) (MALE) LONG 5V RSENSE 0.01Ω Z1 10Ω OPTIONAL 0.1µF Q1 Si4410DY + VOUT 5V 4A 470µF VCC SENSE GATE 100Ω SHORT 20k ON LTC4210-3 100Ω 10k...