Datasheet4U Logo Datasheet4U.com

LTC4242 - Dual Slot Hot Swap Controller

Key Features

  • Allows Live Insertion into PCI Express® Backplane Controls Two Independent PCI Express Slots Independent Control of Main and Auxiliary Supplies 20V Rating for 12V Supply Input Pins Integrated 0.25Ω AUX Switches Limits Fault Current in ≤1µs Force On Test Mode Adjustable Supply Voltage Power-Up Rate High Side Drivers for N-Channel MOSFETs Thermal Shutdown Protection Available in 38-Lead QFN and 36-Lead SSOP Packages U.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTC4215-2 Hot Swap Controller Linear
LTC4215-3 Hot Swap Controller Linear
LTC4225-1 Dual Ideal Diode and Hot Swap Controller Linear
LTC4225-2 Dual Ideal Diode and Hot Swap Controller Linear
LTC4227 Dual Ideal Diode and Single Hot Swap Controller Linear

Other Datasheets by Linear Technology (Analog Devices)

Part Number Description
LTC4240 CompactPCI Hot Swap Controller
LTC4241 PCI-Bus
LTC4244 CompactPCI Bus Hot Swap Controller
LTC4244-1 CompactPCI Bus Hot Swap Controllers
LTC4245 Multiple Supply Hot Swap Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com LTC4242 Dual Slot Hot Swap Controller for PCI Express DESCRIPTIO The LTC®4242 Hot SwapTM controller allows safe board insertion and removal for two independent slots on a PCI Express backplane. External N-channel transistors control the 12V and 3.3V supplies while integrated switches control the 3.3V auxiliary supplies. Both 12V and 3.3V supplies can be ramped up at an adjustable rate. Dual level circuit breakers and fast active current limiting protect all supplies against overcurrent faults. A supply filter at the VCC pin allows the LTC4242 to endure supply transients. The EN input detects the presence of a card in the PCI Express slot. The FAULT and AUXFAULT outputs alert the system of overcurrent conditions on the main and auxiliary supplies, respectively.