Datasheet4U Logo Datasheet4U.com

LTC6403-1 - Low Power Fully Differential Input/Output Amplifier/Driver

General Description

The LTC®6403-1 is a precision, very low noise, low distortion, fully differential input/output amplifier optimized for 3V to 5V, single supply operation.

The LTC6403-1 is unity gain stable.

The LTC6403-1 closed-loop bandwidth extends from DC to 200MHz.

Key Features

  • Very Low Distortion: (2VP-P, 3MHz):.
  • 95dBc Fully Differential Input and Output Low Noise: 2.8nV/√Hz Input-Referred 200MHz Gain-Bandwidth Product Slew Rate: 200V/μs Adjustable Output Common Mode Voltage Rail-to-Rail Output Swing Input Range Extends to Ground Large Output Current: 60mA (Typ) DC Voltage Offset.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTC6412 31dB Range Analog-Controlled VGA Linear Technology Corporation
LTC6417 1.6GHz Low Noise High Linearity Differential Buffer/16-Bit ADC Driver Linear
LTC6430-15 High Linearity Differential RF/IF Amplifier/ADC Driver Linear
LTC6430-20 High Linearity Differential RF/IF Amplifier/ADC Driver Linear
LTC6431-15 Gain Block IF Amplifier Linear

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LTC6400-14 Low Distortion Differential ADC Driver
LTC6400-20 Low Distortion Differential ADC Driver
LTC6400-26 Low Distortion Differential ADC Driver
LTC6400-8 Low Distortion Differential ADC Driver
LTC6401-14 Low Distortion Differential ADC Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com LTC6403-1 200MHz, Low Noise, Low Power Fully Differential Input/Output Amplifier/Driver DESCRIPTION The LTC®6403-1 is a precision, very low noise, low distortion, fully differential input/output amplifier optimized for 3V to 5V, single supply operation. The LTC6403-1 is unity gain stable. The LTC6403-1 closed-loop bandwidth extends from DC to 200MHz. In addition to the normal unfiltered outputs (+OUT and –OUT), the LTC6403-1 has a built-in 44.2MHz differential single-pole low pass filter and an additional pair of filtered outputs (+OUTF, and –OUTF). An input referred voltage noise of 2.8nV/√⎯H⎯z enables the LTC6403-1 to drive state-of-the-art 14- to 18-bit ADCs while operating on the same supply voltage, saving system cost and power.