Datasheet Details
| Part number | LTC6605-10 |
|---|---|
| Manufacturer | Linear Technology (now Analog Devices) |
| File Size | 293.37 KB |
| Description | Dual Matched 10MHz Filter |
| Download | LTC6605-10 Download (PDF) |
|
|
| Part number | LTC6605-10 |
|---|---|
| Manufacturer | Linear Technology (now Analog Devices) |
| File Size | 293.37 KB |
| Description | Dual Matched 10MHz Filter |
| Download | LTC6605-10 Download (PDF) |
|
|
|
www.DataSheet4U.com n n n n n n n Two Matched 10MHz 2nd Order Lowpass Filters with Differential Amplifiers Gain Match: ±0.35dB Max, Passband Phase Match: ±1.2° Max, Passband Single-Ended or Differential Inputs < –90dBc Distortion in Passband 2.1nV/√Hz Op Amp Noise Density Pin-Selectable Gain (0dB/12dB/14dB) Pin-Selectable Power Consumption (0.35mA/ 16.2mA/33.1mA) Rail-to-Rail Output Swing Adjustable Output Common Mode Voltage Control Buffered, Low Impedance Outputs 2.7V to 5.25V Supply Voltage Small 22-Pin 6mm × 3mm × 0.75mm DFN Package The LTC®6605-10 contains two independent, fully differential amplifiers configured as matched 2nd order 10MHz lowpass filters.
The f–3dB of the filters is adjustable in the range of 9.7MHz to 14MHz.
The internal op amps are fully differential,
| Part Number | Description |
|---|---|
| LTC6605-14 | Dual Matched 14MHz Filter |
| LTC6605-7 | Dual Matched 7MHz Filter |
| LTC660 | 100mA CMOS Voltage Converter |
| LTC6601-1 | Filter/ADC Driver |
| LTC6601-2 | Filter/ADC Driver |
| LTC6602 | High Frequency Bandpass/Lowpass Filters |
| LTC6603 | Dual Adjustable Lowpass Filter |
| LTC6652 | Precision Low Drift Low Noise Buffered Reference |
| LTC6655 | Low Drift Precision References |
| LTC6078 | Dual/Quad CMOS Rail-to-Rail Input/Output Amplifiers |