Linear Technology LT1029
the LT1029 is 700µA to 10mA. The LT1029 will replace an LM136-5 or LM336-5 and simplify circuits using the “minimum temperature coefficient” trim network. The LT1029 does not require this special network to meet its temperature drift specification; these application network components are simply removed.| Part No. | LT1029 |
|---|---|
| Datasheet | LT1029 Download |
| Manufacturer |  Linear Technology |
| Description | 5V Bandgap Reference |
| Buy | Stock & Price |
FEATURES
● 0.2% Output Tolerance● 0.6Ω Shunt Impedance
● 700µA to 10mA Operating Current
● Pin Compatible with LM136-5
● 20ppm/°C Max Drift
● Output Voltage Trim does not Affect Drift
● Can be Used as Positive or Negative Reference U APPLICATIO S
● A-to-D and D-to-A Converters
● Precision Regulators
● Precision Current Sources
● V to F and F to V Converters TYPICAL APPLICATIO 15V R1 10k 5V LT1029 LT1029 R2 10k –5V –15V LT1029
● TA01 DESCRIPTIO The LT®1029 is a 5V bandgap reference intended for use in the shunt or “Zener” mode, allowing it to be used as either a positive or negative reference. The output is pretrimmed to ± 0.2% accuracy with 20ppm/°C maximum temperature drift. A trim pin allows additional output adjustment for even more precise output voltage. Operating current range for the LT1029 is 700µA to 10mA. Extremely low dynamic impedance allows excellent output regulation even with fluctuating operating current. If output trimming is required for initial accuracy, the diodes in the trim network should be replaced with jumpers. , LTC and LT are registered trademarks of Linear Technology Corporation.
