FEATURES
s s s s s s s Wide Battery Input Range: 4.5V to 30V Grounded Lamp or Floating Lamp Configurations Open Lamp Protection Precision 100µA Full-Scale DAC Programming Current 2-Wire SMBus Interface Two Selectable SMBus Addresses DAC Setting Is Retained in Shutdown to-lamp-current control” and communicates using the 2-wire SMBus serial interface. On Power-up, the DAC output current assumes midrange or zero scale, depending on the logic state of the ADR pin.The entire IC can be shut down through the SMBSUS pin or by setting the SHDN bit = 1 in the SMBus command byte. Digital data for the DAC output current is retained internally and the supply current drops to 40µA for standby operation. Supply current in this operating mode drops to 150µA. The IC also has a battery supply pin that operates from 4.5V to 30V. The LT1786F draws 6mA typical quiescent current. A 200kHz switching frequency minimizes magnetic component size. Current mode switching techniques with cycle-by-cycle limiting gives high reliability and simple loop frequency compensation.
Linear Technology
