Datasheet4U.com

LT1952-1 Datasheet PDF

Linear Technology LT1952-1

The LT1952-1 allows start-up from lower input voltages. Each device can be programmed over a 100kHz to 500kHz frequency range and the part can be synchronized to an external clock. The error amplifier is a true op amp, allowing a wide range of compensation networks.
Part No. LT1952-1
Datasheet LT1952-1 Download
Manufacturer
Linear Technology
Description Single Switch Synchronous Forward Controller
Buy Stock & Price
LT1952-1 datasheet page 1 preview

FEATURES

n n n n LT1952/LT1952-1 Single Switch Synchronous Forward Controller

DESCRIPTION

The LT®1952/LT1952-1 are current mode PWM controllers optimized to control the forward converter topology, using one primary MOSFET. The LT1952/LT1952-1 provide synchronous rectifier control, resulting in extremely high efficiency. A programmable Volt-Second clamp provides a safeguard for transformer reset that prevents saturation. This allows a single MOSFET on the primary side to reliably run at greater than 50% duty cycle for high MOSFET, transformer and rectifier utilization. The devices include soft-start for controlled exit from shutdown and undervoltage lockout. A precision 107mV current limit threshold, independent of duty cycle, combines with softstart to provide hiccup short-circuit protection. The LT1952 is optimized for micropower bootstrap start-up from high input voltages. Programmable slope compensation and leading edge blanking allow optimization of loop bandwidth with a wide range of inductors and MOSFETs.
LT1952-1 page 2 preview LT1952-1 page 3 preview