Datasheet4U.com

LT3684 Datasheet PDF

Linear Technology LT3684

The LT3684’s high operating frequency allows the use of small, low cost inductors and ceramic capacitors resulting in low output ripple while keeping total solution size to a minimum. The low current shutdown mode reduces input supply current to less than 1µA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). The LT3684 is available in 10-Pin MSOP and 3mm × 3mm DFN packages with Exposed Pads for low thermal resistance.
Part No. LT3684
Datasheet LT3684 Download
Manufacturer
Linear Technology
Description 2.8MHz Step-Down Switching Regulator
Buy Stock & Price
LT3684 datasheet page 1 preview

FEATURES

●
●
●
●
●
●
●
●
●
●
●

DESCRIPTION

The LT®3684 is an adjustable frequency (300kHz to 2.8MHz) monolithic buck switching regulator that accepts input voltages up to 34V (36V maximum). A high efficiency 0.18Ω switch is included on the die along with a boost Schottky diode and the necessary oscillator, control and logic circuitry. Current mode topology is used for fast transient response and good loop stability. A power good flag signals when VOUT reaches 90% of the programmed output voltage. , LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Wide Input Range: 3.6V to 34V Operating, 36V Maximum 2A Maximum Output Current Adjustable Switching Frequency: 300kHz to 2.8MHz Low Shutdown Current: IQ < 1µA Integrated Boost Diode Power Good Flag Saturating Switch Design: 0.18Ω On-Resistance 1.265V Feedback Reference Voltage Output Voltage: 1.265V to 20V Soft-Start Capability Small 10-Pin Thermally Enh...
LT3684 page 2 preview LT3684 page 3 preview