Linear Technology LTC1050
the LTC1050 is that it integrates on-chip the two sample-andhold capacitors usually required externally by other chopper amplifiers. The LTC1050 has an offset voltage of 0.5µV, drift of 0.01µV/°C, DC to 10Hz, input noise voltage of 1.6µVP-P and a typical voltage gain of 160dB. The slew rate of 4V/µs and a gain bandwidth product of 2.5MHz are achieved with only 1mA of supply current.| Part No. | LTC1050 |
|---|---|
| Datasheet | LTC1050 Download |
| Manufacturer |  Linear Technology |
| Description | Precision Zero-Drift Operational Amplifier |
| Buy | Stock & Price |
FEATURES
● No External Components Required● Noise Tested and Guaranteed
● Low Aliasing Errors
● Maximum Offset Voltage: 5µV
● Maximum Offset Voltage Drift: 0.05µV/°C
● Low Noise: 1.6µVP-P (0.1Hz to 10Hz)
● Minimum Voltage Gain: 130dB
● Minimum PSRR: 125dB
● Minimum CMRR: 120dB
● Low Supply Current: 1mA
● Single Supply Operation: 4.75V to 16V
● Input Common Mode Range Includes Ground
● Output Swings to Ground
● Typical Overload Recovery Time: 3ms U APPLICATIO S
● Thermocouple Amplifiers
● Electronic Scales
● Medical Instrumentation
● Strain Gauge Amplifiers
● High Resolution Data Acquisition
● DC Accurate RC Active Filters , LTC and LT are registered trademarks of Linear Technology Corporation. LTC1050 Precision Zero-Drift Operational Amplifier with Internal Capacitors DESCRIPTIO The LTC®1050 is a high performance, low cost zero-drift operational amplifier. The unique achievement of Further, the LTC1050 offers better combined overall DC and AC performance than is available from other chopper stabilized amplifiers with or without internal sample-and-hold capacitors.
