Datasheet4U Logo Datasheet4U.com

LTC1064-3 - 8th Order Linear Phase Lowpass Filter

Key Features

  • 8th Order Filter in a 14-Pin Package.
  • 95kHz Maximum Corner Frequency.
  • No External Components.
  • 75:1, 150:1 and 120:1 Clock to Cutoff Frequency Ratio.
  • 60µVRMS Total Wideband Noise.
  • 0.03% THD or Better.
  • Operates from ±2.37V to ±8V Power Supplies.
  • Low Total Output DC Offset U.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTC1064-1 Low Noise/8th Order Clock Sweepable Elliptic Lowpass Filter Linear Technology
LTC1064-2 Low Noise/ High Frequency/ 8th Order Butterworth Lowpass Filter Linear Technology
LTC1064-4 Low Noise/8th Order/ Clock Sweepable Cauer Lowpass Filter Linear Technology
LTC1064-7 Linear Phase/ 8th Order Lowpass Filter Linear Technology
LTC1064 Low Noise/ Fast/ Quad Universal Filter Building Block Linear Technology

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LTC1068 Filter Building Blocks
LTC1051 Dual/Quad Precision Zero-Drift Operational Amplifiers
LTC1096 Micropower Sampling 8-Bit Serial I/O A/D Converters
LTC1096L Micropower Sampling 8-Bit Serial I/O A/D Converters
LTC1098 Micropower Sampling 8-Bit Serial I/O A/D Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
U U LTC1064-3 Low Noise, High Frequency, 8th Order Linear Phase Lowpass Filter FEATURES ■ 8th Order Filter in a 14-Pin Package ■ 95kHz Maximum Corner Frequency ■ No External Components ■ 75:1, 150:1 and 120:1 Clock to Cutoff Frequency Ratio ■ 60µVRMS Total Wideband Noise ■ 0.03% THD or Better ■ Operates from ±2.37V to ±8V Power Supplies ■ Low Total Output DC Offset U APPLICATIO S ■ Antialiasing Filters ■ Smoothing Filters ■ Tracking High Frequency Lowpass Filters DESCRIPTIO The LTC®1064-3 is a monolithic 8th order lowpass Bessel filter, which provides a linear phase response over its entire passband. An external TTL or CMOS clock programs the filter’s cutoff frequency. The clock to cutoff frequency ratio is 75:1 (Pin 10 at V+) or 150:1 (Pin 10 at V–) or 120:1 (Pin 10 at GND).