LTC1710 Datasheet PDF | Linear Technology

Linear Technology LTC1710

the LTC1710 operates over an input voltage range of 2.7V to 5.5V while maintaining the SMBus specified 0.6V VIL and 1.4V VIH input thresholds. The LTC1710 has one three-state programmable address pin that allows three different addresses for a total of six available switches on the same bus. The LTC1710 also features a separate user-controlled drain supply (SW0D) to Switch 0 so that it can be used to control SMBus peripherials using a different power supply.

Part No.	LTC1710
Datasheet	LTC1710 Download
Manufacturer	Linear Technology
Description	SMBus Dual Monolithic High Side Switch
Buy	Stock & Price

FEATURES

s s s s s s s s s s

DESCRIPTION

The LTC®1710 SMBus dual switch has two built-in 0.4Ω/ 300mA switches that are controlled by a 2-wire SMBus interface. With a low standby current of 14µA (3.3V), Using the 2-wire interface, CLK and DATA, the LTC1710 follows SMBus’s Send Byte Protocol to independently control the two 0.4Ω internal N-channel power switches, which are fully enhanced by onboard charge pumps. , LTC and LT are registered trademarks of Linear Technology Corporation. Two 0.4Ω/300mA N-Channel Switches Available in MS8 and SO-8 Packages SMBus and I2C Compatible 0.6V VIL and 1.4V VIH for DATA and CLK Low Standby Current: 14µA Separate Drain Connection to SW0 Three Addresses from One Three-State Address Pin Independent Control of Up to Six Switches Built-In Power-On Reset Timer Built-In Undervoltage Lockout U

APPLICATIONS

s s s s s s Handheld Computer Power Management Computer Peripheral Control Laptop Computer Power Plane Switching Portable Equipment Power Control Industria...