LTC2965 Datasheet | Linear Technology

Features n Wide Operating Range: 3.5V to 100V n Wide Monitoring Range: 3.5V to 98V n Quiescent Current: 7µA n Adjustable Threshold Range n Internal High Value Resistive Dividers n ±1.4% (Max) Threshold Accuracy Over Temperature n Polarity Selection n100V Rated Outputs n Selectable Built-In Hysteresis n16-Lead MS and 8-Lead 3mm × 3mm DFN Packages Applications n Portable Equipment n Battery-Powered Equipment n Tele Systems n Automotive/Industrial Electronics LTC2965 100V Micropower Single Voltage Monitor Description The LTC®2965 is a low current, high voltage single channel voltage monitor. Internal high value resistors sense the input monitor pin providing a pact and low power solution for voltage monitoring. Two parator reference inputs (INH and INL) are included to allow configuration of a high and low threshold using an external resistive divider biased from the on-chip reference. A range selection pin is provided to set the internal resistive divider for 10x or 40x scaling. The thresholds are scaled according to the range selection settings. Additionally, either INH or INL can be grounded to enable built-in hysteresis. Polarity selection pin allows the output to be inverted. The output is 100V capable and includes a 500k pull-up resistor to an internal supply. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and Hot Swap is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. Typical Application THRESHOLD CONFIGURATION Undervoltage Monitor 24V 200k 91k 909k VIN REF INH LTC2965 100k OUT 24V UNDERVOLTAGE 5V 5V SYS PS RS GND POLARITY AND RANGE SELECTION RISING THRESHOLD FALLING THRESHOLD HYSTERESIS RANGE 20.0V 18.2V 1.8V 10x 2965 TA01a IVIN (µA) VIN MONITOR RANGE 3.5V to 24.5V 14V to 98V RANGE SELECTION 10x 40x Supply Current vs VIN 2 RANGE = 40x OUT = LOW 0 IREF = 0µA 0...