LTC3604 Datasheet PDF | Linear Technology

Linear Technology LTC3604

the LTC3604 can be externally synchronized over the same frequency range. This unique constant frequency/ controlled on-time architecture is ideal for high step-down ratio applications that demand high switching frequencies and fast transient response. The LTC3604 offers two operational modes: Burst Mode operation and forced continuous mode to allow the user to optimize output voltage ripple, noise, and light load efficiency for a given application.

Part No.	LTC3604
Datasheet	LTC3604 Download
Manufacturer	Linear Technology
Description	2.5A 15V Monolithic Synchronous Step-Down Regulator
Buy	Stock & Price

FEATURES

nn 3.6V to 15V Operating Input Voltage Range nn 2.5A Output Current nn Up to 95% Efficiency nn Very Low Duty Cycle Operation: 5% at 2.25MHz nn Adjustable Switching Frequency: 800kHz to 4MHz nn External Frequency Synchronization nn Current Mode Operation for Excellent Line and Load Transient Response nn User Selectable Low Ripple (20mVP-P Typical) Burst Mode® (No Load IQ = 300µA) or Forced Continuous Operation nn 0.6V Reference Allows Low Output Voltages nn Short-Circuit Protected nn Output Voltage Tracking Capability nn Power Good Status Output nn Available in Small, Thermally-Enhanced, 16-Pin QFN (3mm × 3mm) and MSOP Packages

APPLICATIONS

nn Distributed Power Systems nn Lithium-Ion Battery-Powered Instruments nn Point-of-Load Power Supplies L, LT, LTC, LTM, Burst Mode, Linear Technology and the Linear logo are registered trademarks and Hot Swap is a registered trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S.