Linear Technology LTC4301
the LTC4301 allows the VCC, SDAIN and SCLIN pullup voltage and the SDAOUT and SCLOUT pull-up voltage to be independent from each other. When the connection is made, the LTC4301 provides bidirectional buffering, keeping the backplane and card capacitances isolated. When driven low, the CS input pin allows the part to connect after a stop bit or bus idle occurs.| Part No. | LTC4301 |
|---|---|
| Datasheet | LTC4301 Download |
| Manufacturer |  Linear Technology |
| Description | Supply Independent Hot Swappable 2-Wire Bus Buffer |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
●
● DESCRIPTIO Allows Bus Pull-Up Voltages Above or Below VCC Bidirectional Buffer* for SDA and SCL Lines Increases Fanout Prevents SDA and SCL Corruption During Live Board Insertion and Removal from Backplane Isolates Input SDA and SCL Line from Output 10kV Human Body Model ESD Protection 1V Precharge On All SDA and SCL Lines Supports Clock Stretching, Arbitration and Synchronization High Impedance SDA, SCL Pins for VCC = 0V CS Gates Connection from Input to Output Compatible with I2CTM, I2C Fast Mode and SMBus Standards (Up to 400kHz Operation) Small 8-Pin MSOP and DFN (3mm × 3mm) Packages The LTC®4301 supply independent, hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. In addition, Control circuitry prevents the backplane from being connected to the card until a stop bit or a bus idle is present. During insertion, the SDA and SCL lines are precharged to 1V to minimize bus disturbances.
