LT1008 Datasheet | Linear Technology

Features - Guaranteed Bias Current TA = 25°C: 100p A Max TA = - 55°C to 125°C: 600p A Max - Guaranteed Offset Voltage: 120μV Max - Guaranteed Drift: 1.5μV/°C Max - Low Noise, 0.1Hz to 10Hz: 0.5μVP-P - Guaranteed Low Supply Current: 600μA Max - Guaranteed CMRR: 114d B Min - Guaranteed PSRR: 114d B Min - Guaranteed Voltage Gain with 5m A Load Current - Available in 8-Lead PDIP and SO Packages U APPLICATIO S - Precision Instrumentation - Charge Integrators - Wide Dynamic Range Logarithmic Amplifiers - Light Meters - Low Frequency Active Filters - Standard Cell Buffers - Thermocouple Amplifiers Picoamp Input Current, Microvolt Offset, Low Noise Op Amp DESCRIPTIO The LT®1008 is a universal precision operational amplifier that can be used in practically all precision applications. The LT1008 bines for the first time, picoampere bias currents (which are maintained over the full - 55°C to 125°C temperature range), microvolt offset voltage (and low drift with time and temperature), low voltage and current noise, and low power dissipation. Extremely high mon mode and power supply rejection ratios, and the ability to deliver 5m A load current with high voltage gain round out the LT1008’s superb precision specifications. The all around excellence of the LT1008 eliminates the necessity of the time consuming error analysis procedure of precision system design in many applications; the LT1008 can be stocked as the universal precision op amp. The LT1008 is externally pensated with a single capacitor for additional flexibility in shaping the frequency response of the amplifier. It plugs into and upgrades all standard LM108A/LM308A applications. For an internally pensated version with even lower offset voltage but otherwise similar performance see the LT1012. , LT, LTC and LTM are registered trademarks of Linear Technology Corporation. TYPICAL APPLICATIO Input Amplifier for 4.5 Digit...