LT1011 Datasheet | Linear Technology

LT1011/LT1011A Voltage parator Response Time vs Overdrive 500 450 16 17 19 6012 12-BIT D/A CONVERTER INPUT 0V TO 10V R4- 2.49k R6 820Ω PARALLEL OUTPUTS 4 5V 24 E 12 START CLOCK f = 1.4MHz 1011 TA01 Features s s s s s s s s s DESCRIPTIO Pin patible with LM111 Series Devices Guaranteed Max 0.5m V Input Offset Voltage Guaranteed Max 25n A Input Bias Current Guaranteed Max 3n A Input Offset Current Guaranteed Max 250ns Response Time Guaranteed Min 200,000 Voltage Gain 50m A Output Current Source or Sink ±30V Differential Input Voltage Fully Specified for Single 5V Operation U APPLICATIO S s s s s s s s SAR A/D Converters Voltage-to-Frequency Converters Precision RC Oscillator Peak Detector Motor Speed Control Pulse Generator Relay/Lamp Driver , LTC and LT are registered trademarks of Linear Technology Corporation. The LT ®1011 is a general purpose parator with significantly better input characteristics than the LM111. Although pin patible with the LM111, it offers four times lower bias current, six times lower offset voltage and five times higher voltage gain. Offset voltage drift, a previously unspecified parameter, is guaranteed at 15µV/°C. Additionally, the supply current is lower by a factor of two with no loss in speed. The LT1011 is several times faster than the LM111 when subjected to large overdrive conditions. It is also fully specified for DC parameters and response time when operating on a single 5V supply. These parametric improvements allow the LT1011 to be used in high accuracy (≥ 12-bit) systems without trimming. In a 12-bit A/D application, for instance, using a 2m A DAC, the offset error introduced by the LT1011 is less than 0.5LSB. The LT1011 retains all the versatile Features of the LM111, including single 3V to ±18V supply operation, and a floating transistor output with 50m A source/sink capability. It can drive loads referenced to ground, negative supply or positive supply, and is specified up to 50V between V - and the collector...