LT1169 Datasheet | Linear Technology

LT1169 Dual Low Noise, Picoampere Bias Current, JFET Input Op Amp Features s s s s s s s s s s DESCRIPTIO Input Bias Current, Warmed Up: 20p A Max 100% Tested Low Voltage Noise: 8n V/√Hz Max S8 and N8 Package Standard Pinout Very Low Input Capacitance: 1.5p F Voltage Gain: 1.2 Million Min Offset Voltage: 2m V Max Input Resistance: 1013Ω Gain-Bandwidth Product: 5.3MHz Typ Guaranteed Specifications with ± 5V Supplies Guaranteed Matching Specifications APPLICATI s s s s S s s Photocurrent Amplifiers Hydrophone Amplifiers High Sensitivity Piezoelectric Accelerometers Low Voltage and Current Noise Instrumentation Amplifier Front Ends Two and Three Op Amp Instrumentation Amplifiers Active Filters The LT1169 achieves a new standard of excellence in noise performance for a dual JFET op amp. For the first time low voltage noise (6n V/√Hz) is simultaneously offered with extremely low current noise (1f A/√Hz), providing the lowest total noise for high impedance transducer applications. Unlike most JFET op amps, the very low input bias current (5p A Typ) is maintained over the entire mon mode range which results in an extremely high input resistance (1013Ω). When bined with a very low input capacitance (1.5p F) an extremely high input impedance results, making the LT1169 the first choice for amplifying low level signals from high impedance transducers. The low input capacitance also assures high gain linearity when buffering AC signals from high impedance transducers. The LT1169 is unconditionally stable for gains of 1 or more, even with 1000p F capacitive loads. Other key Features are 0.6m V VOS and a voltage gain over 4 million. Each individual amplifier is 100% tested for voltage noise, slew rate (4.2V/µs), and gain-bandwidth product (5.3MHz). The LT1169 is offered in the S8 and N8 packages. A full set of matching specifications are provided for precision instrumentation amplifier front ends. Specifications at ± 5V supply operation are also provided. For an even lower...