LT1215 Datasheet | Linear Technology

LT1215/LT1216 23MHz, 50V/µs, Single Supply Dual and Quad Precision Op Amps Features s s s DESCRIPTIO s s s s s s s s s Slew Rate: 50V/µs Typ Gain-Bandwidth Product: 23MHz Typ Fast Settling to 0.01% 2V Step to 200µV: 250ns Typ 10V Step to 1m V: 480ns Typ Excellent DC Precision in All Packages Input Offset Voltage: 450µV Max Input Offset Voltage Drift: 10µV/°C Max Input Offset Current: 120n A Max Input Bias Current: 600n A Max Open-Loop Gain: 1000V/m V Min Single Supply Operation Input Voltage Range Includes Ground Output Swings to Ground While Sinking Current Low Input Noise Voltage: 12.5n V/√Hz Typ Low Input Noise Current: 0.5p A/√Hz Typ Specified on 3.3V, 5V and ±15V Large Output Drive Current: 30m A Min Low Supply Current per Amplifier: 6.6m A Max Dual in 8-Pin DIP and SO-8 Quad in 14-Pin DIP and NARROW SO-16 The LT®1215 is a dual, single supply precision op amp with a 23MHz gain-bandwidth product and a 50V/µs slew rate. The LT1216 is a quad version of the same amplifier. The DC precision of the LT1215/LT1216 eliminates trims in most systems while providing high frequency performance not usually found in single supply amplifiers. The LT1215/LT1216 will operate on any supply greater than 2.5V and less than 36V total. These amplifiers are specified on single 3.3V, single 5V and ±15V supplies, and only require 5m A of quiescent supply current per amplifier. The inputs can be driven beyond the supplies without damage or phase reversal of the output. The minimum output drive is 30m A, ideal for driving low impedance loads. U APPLICATIO S s s s s s s Note: For applications requiring less slew rate, see the LT1211/LT1212 and LT1213/LT1214 data sheets. 2.5V Full-Scale 12-Bit Systems: VOS ≤ 0.75 LSB 10V Full-Scale 16-Bit Systems: VOS ≤ 3 LSB Active Filters Photo Diode Amplifiers DAC Current to Voltage Amplifiers Battery-Powered Systems , LTC and LT are registered trademarks of Linear Technology Corporation. TYPICAL APPLICATIO 5V VIN- Single Supply Instrumentation...