LT1376 Datasheet | Linear Technology

LT1375/LT1376 1.5A, 500k Hz Step-Down Switching Regulators Features s s s s s s s s Constant 500k Hz Switching Frequency Easily Synchronizable Uses All Surface Mount ponents Inductor Size Reduced to 5µH Saturating Switch Design: 0.4Ω Effective Supply Current: 2.5m A Shutdown Current: 20µA Cycle-by-Cycle Current Limiting is current mode for fast transient response and good loop stability. Both fixed output voltage and adjustable parts are available. A special high speed bipolar process and new design techniques achieve high efficiency at high switching frequency. Efficiency is maintained over a wide output current range by using the output to bias the circuitry and by utilizing a supply boost capacitor to saturate the power switch. A shutdown signal will reduce supply current to 20µA on both parts. The LT1375 can be externally synchronized from 550k Hz to 1MHz with logic level inputs. The LT1375/LT1376 fit into standard 8-pin PDIP and SO packages, as well as a fused lead 16-pin SO with much lower thermal resistance. Full cycle-by-cycle short-circuit protection and thermal shutdown are provided. Standard surface mount external parts are used, including the inductor and capacitors. For low input voltage applications with 3.3V output, see LT1507. This is a functionally identical part that can operate with input voltages between 4.5V and 12V. , LTC and LT are registered trademarks of Linear Technology Corporation. U APPLICATIO S s s s s Portable puters Battery-Powered Systems Battery Charger Distributed Power DESCRIPTIO The LT ®1375/LT1376 are 500k Hz monolithic buck mode switching regulators. A 1.5A switch is included on the die along with all the necessary oscillator, control and logic circuitry. High switching frequency allows a considerable reduction in the size of external ponents. The topology TYPICAL APPLICATIO 5V Buck Converter D2 1N914 C2 0.1µF VSW LT1376-5 BIAS DEFAULT = ON SHDN GND FB VC CC 3.3n F D2 1N5818 L1- - 5µH C3- 10µF TO...