LT1630 Datasheet | Linear Technology

LT1630/LT1631 30MHz, 10V/µs, Dual/Quad Rail-to-Rail Input and Output Precision Op Amps Features s s s s s s s s s s s s s s s DESCRIPTION The LT ®1630/LT1631 are dual/quad, rail-to-rail input and output op amps with a 30MHz gain-bandwidth product and a 10V/µs slew rate. The LT1630/LT1631 have excellent DC precision over the full range of operation. Input offset voltage is typically less than 150µV and the minimum open-loop gain of one million into a 10k load virtually eliminates all gain error. To maximize mon mode rejection, the LT1630/LT1631 employ a patented trim technique for both input stages, one at the negative supply and the other at the positive supply, that gives a typical CMRR of 106d B over the full input range. The LT1630/LT1631 maintain their performance for supplies from 2.7V to 36V and are specified at 3V, 5V and ±15V supplies. The inputs can be driven beyond the supplies without damage or phase reversal of the output. The output delivers load currents in excess of 35m A. The LT1630 is available in 8-pin PDIP and SO packages with the standard dual op amp pinout. The LT1631 Features the standard quad op amp configuration and is available in a 14-pin plastic SO package. These devices can be used as plug-in replacements for many standard op amps to improve input/output range and performance. Gain-Bandwidth Product: 30MHz Slew Rate: 10V/µs Low Supply Current per Amplifier: 3.5m A Input mon Mode Range Includes Both Rails Output Swings Rail-to-Rail Input Offset Voltage, Rail-to-Rail: 525µV Max Input Offset Current: 150n A Max Input Bias Current: 1000n A Max Open-Loop Gain: 1000V/m V Min Low Input Noise Voltage: 6n V/√Hz Typ Low Distortion: - 91d Bc at 100k Hz Wide Supply Range: 2.7V to ±15V Large Output Drive Current: 35m A Min Dual in 8-Pin PDIP and SO Packages Quad in Narrow 14-Pin SO Package U APPLICATIONS s s s s s Active Filters Rail-to-Rail Buffer Amplifiers Driving A/D Converters Low Voltage Signal Processing Battery-Powered Systems , LTC and LT...