LT1633 Datasheet | Linear Technology

LT1632/LT1633 45MHz, 45V/µs, Dual/Quad Rail-to-Rail Input and Output Precision Op Amps Features s s s s s s s s s s s s s s DESCRIPTION The LT ®1632/LT1633 are dual/quad, rail-to-rail input and output op amps with a 45MHz gain-bandwidth product and a 45V/µs slew rate. The LT1632/LT1633 have excellent DC precision over the full range of operation. Input offset voltage is typically less than 400µV and the minimum open-loop gain of 0.8 million into a 10k load virtually eliminates all gain error. mon mode rejection is typically 83d B over the full railto-rail input range when on a single 5V supply for excellent noninverting performance. The LT1632/LT1633 maintain their performance for supplies from 2.7V to 36V and are specified at 3V, 5V and ± 15V supplies. The inputs can be driven beyond the supplies without damage or phase reversal of the output. The output delivers load currents in excess of 35m A. The LT1632 is available in 8-pin PDIP and SO packages with the standard dual op amp pinout. The LT1633 Features the standard quad op amp configuration and is available in a 14-pin plastic SO package. These devices can be used as plug-in replacements for many standard op amps to improve input/output range and performance. , LTC and LT are registered trademarks of Linear Technology Corporation. Gain-Bandwidth Product: 45MHz Slew Rate: 45V/µs Low Supply Current per Amplifier: 4.3m A Input mon Mode Range Includes Both Rails Output Swings Rail-to-Rail Input Offset Voltage, Rail-to-Rail: 1350µV Max Input Offset Current: 440n A Max Input Bias Current: 2.2µA Max Open-Loop Gain: 800V/m V Min Low Input Noise Voltage: 12n V/√Hz Typ Low Distortion: - 92d Bc at 100k Hz Wide Supply Range: 2.7V to ± 15V Large Output Drive Current: 35m A Min Dual in 8-Pin PDIP and SO Packages U APPLICATIONS s s s s s Active Filters Rail-to-Rail Buffer Amplifiers Driving A/D Converters Low Voltage Signal Processing Battery-Powered Systems TYPICAL APPLICATION Frequency Response Single Supply, 40d B...