LT1639 Datasheet | Linear Technology

Features s s s s s s s s s s s s s LT1638/LT1639 1.2MHz, 0.4V/µs Over-The-Top TM Micropower Rail-to-Rail Input and Output Op Amps DESCRIPTION The LT ®1638 is a low power dual rail-to-rail input and output operational amplifier available in the standard 8-pin PDIP and SO packages as well as the 8-lead MSOP package. The LT1639 is a low power quad rail-to-rail input and output operational amplifier offered on the standard 14-pin PDIP and surface mount packages. The LT1638/LT1639 op amps operate on all single and split supplies with a total voltage of 2.5V to 44V drawing only 170µA of quiescent current per amplifier. These amplifiers are reverse battery protected and draw no current for reverse supply up to 18V. The input range of the LT1638/LT1639 includes both supplies, and a unique feature of this device is its capability to operate over the top with either or both of its inputs above V +. The inputs handle 44V, both differential and mon mode, independent of supply voltage. The input stage incorporates phase reversal protection to prevent false outputs from occurring even when the inputs are 22V below the negative supply. Protective resistors are included in the input leads so that current does not bee excessive when the inputs are forced below the negative supply. The LT1638/LT1639 can drive loads up to 25m A and still maintain rail-to-rail capability. The op amps are unity-gain stable and drive all capacitive loads up to 1000p F when optional output pensation is used. Operates with Inputs Above V + Rail-to-Rail Input and Output Low Power: 230µA per Amplifier Max Gain Bandwidth Product: 1.2MHz Slew Rate: 0.4V/µs High Output Current: 25m A Min Specified on 3V, 5V and ± 15V Supplies Reverse Battery Protection to 18V No Supply Sequencing Problems High Voltage Gain: 1500V/m V Single Supply Input Range: - 0.4V to 44V High CMRR: 98d B No Phase Reversal U APPLICATIONS s s s s s Battery- or Solar-Powered Systems Portable Instrumentation Sensor Conditioning Supply...