LT1714 Datasheet | Linear Technology

LT1713/LT1714 Features Single/Dual, 7ns, Low Power, 3V/5V/±5V Rail-to-Rail parators DESCRIPTIO s Ultrafast: 7ns at 20m V Overdrive 8.5ns at 5m V Overdrive s Rail-to-Rail Inputs s Rail-to-Rail plementary Outputs (TTL/CMOS patible) s Specified at 2.7V, 5V and ±5V Supplies s Low Power (Per parator): 5m A s Output Latch s Inputs Can Exceed Supplies Without Phase Reversal s LT1713: 8-Lead MSOP Package s LT1714: 16-Lead Narrow SSOP Package U APPLICATIO S s High Speed Automatic Test Equipment s Current Sense for Switching Regulators s Crystal Oscillator Circuits s High Speed Sampling Circuits s High Speed A/D Converters s Pulse Width Modulators s Window parators s Extended Range V/F Converters s Fast Pulse Height/Width Discriminators s Line Receivers s High Speed Triggers The LT®1713/LT1714 are Ultra Fast TM 7ns, single/dual parators featuring rail-to-rail inputs, rail-to-rail plementary outputs and an output latch. Optimized for 3V and 5V power supplies, they operate over a single supply voltage range from 2.4V to 12V or from ±2.4V to ±6V dual supplies. The LT1713/LT1714 are designed for ease of use in a variety of systems. In addition to wide supply voltage flexibility, rail-to-rail input mon mode range extends 100m V beyond both supply rails and the outputs are protected against phase reversal for inputs extending further beyond the rails. Also, the rail-to-rail inputs may be taken to opposite rails with no significant increase in input current. The rail-to-rail matched plementary outputs interface directly to TTL or CMOS logic and can sink 10m A to within 0.5V of GND or source 10m A to within 0.7V of V +. The LT1713/LT1714 have internal TTL/CMOS patible latches for retaining data at the outputs. Each latch holds data as long as its latch pin is held high. Latch pin hysteresis provides protection against slow moving or noisy latch signals. The LT1713 is available in the 8-lead MSOP package. The LT1714 is available in the 16-lead narrow...