LT1715 Datasheet | Linear Technology

LT1715 4ns, 150MHz Dual parator with Independent Input/Output Supplies Features s s s s s s s s DESCRIPTIO s Ultra Fast: 4ns at 20m V Overdrive 150MHz Toggle Frequency Separate Input and Output Power Supplies Low Power: 4.6m A per parator at 3V Pinout Optimized for High Speed Use Output Optimized for 3V and 5V Supplies TTL/CMOS patible Rail-to-Rail Output Input Voltage Range Extends 100m V Below Negative Rail Internal Hysteresis with Specified Limits U APPLICATIO S s s s s s s s The LT®1715 is an Ultra Fast TM dual parator optimized for low voltage operation. Separate supplies allow independent analog input ranges and output logic levels with no loss of performance. The input voltage range extends from 100m V below VEE to 1.2V below VCC. Internal hysteresis makes the LT1715 easy to use even with slow moving input signals. The rail-to-rail outputs directly interface to TTL and CMOS. The symmetric output drive results in similar rise and fall times that can be harnessed for analog applications or for easy translation to other single supply logic levels. The LT1715 is available in the 10-pin MSOP package. The pinout of the LT1715 minimizes parasitic effects by placing the most sensitive inputs away from the outputs, shielded by the power rails. For a dual/quad single supply parator with similar propagation delay, see the LT1720/LT1721. For a single parator with similar propagation delay, see the LT1719. , LTC and LT are registered trademarks of Linear Technology Corporation. Ultra Fast is a trademark of Linear Technology Corporation. High Speed Differential Line Receivers Level Translators Window parators Crystal Oscillator Circuits Threshold Detectors/Discriminators High Speed Sampling Circuits Delay Lines TYPICAL APPLICATIO 5V 100MHz Dual Differential Line Receiver 3V Line Receiver Response to 100MHz Clock, 50MHz Data Both with 25m VP-P Inputs 3V + IN A OUT A CLOCK OUT - 0V 3V + IN B OUT B DATA OUT 0V FET PROBES 5ns/DIV 1715 TA02 - -...