LT1789-1 Datasheet | Linear Technology

LT1789-1/LT1789-10 Micropower, Single Supply Rail-to-Rail Output Instrumentation Amplifiers Features s s s s DESCRIPTIO s s s s s s s s s U APPLICATIO S s s s s s s Micropower: 95µA Supply Current Max Low Input Offset Voltage: 100µV Max Low Input Offset Voltage Drift: 0.5µV/°C Max Single Gain Set Resistor: G = 1 to 1000 (LT1789-1) G = 10 to 1000 (LT1789-10) Inputs mon Mode to V - Wide Supply Range: 2.2V to 36V Total Supply CMRR at G = 10: 96d B Min Gain Error: G = 10, 0.25% Max Gain Nonlinearity: G = 10, 40ppm Max Input Bias Current: 40n A Max PSRR at G = 10: 100d B Min 1k Hz Voltage Noise: 48n V/√Hz 0.1Hz to 10Hz Noise: 1.5µVP-P Portable Instrumentation Bridge Amplifiers Strain Gauge Amplifiers Thermocouple Amplifiers Differential to Single-Ended Converters Medical Instrumentation The LT ®1789-1/LT1789-10 are micropower, precision instrumentation amplifiers that are optimized for single supply operation from 2.2V to 36V. The quiescent current is 95µA max, the inputs mon mode to ground and the output swings within 110m V of ground. The gain is set with a single external resistor for a gain range of 1 to 1000 for the LT17891 and 10 to 1000 for the LT1789-10. The high accuracy of the LT1789-1 (40ppm maximum nonlinearity and 0.25% max gain error) is unmatched by other micropower instrumentation amplifiers. The LT1789-10 maximizes both the input mon mode range and dynamic output range when an amplification of 10 or greater is required, allowing precise signal processing where other instrumentation amplifiers fail to operate. The LT1789-1/ LT1789-10 are laser trimmed for very low input offset voltage, low input offset voltage drift, high CMRR and high PSRR. The output can handle capacitive loads up to 400p F (LT1789-1), 1000p F (LT1789-10) in any gain configuration while the inputs are ESD protected up to 10k V (human body). The LT1789-1/LT1789-10 are offered in the 8-pin SO package, requiring significantly less PC board area than discrete multi op amp and...