LT1793 Datasheet | Linear Technology

LT1793 Low Noise, Picoampere Bias Current, JFET Input Op Amp Features s s s s s s s s s DESCRIPTIO Input Bias Current, Warmed Up: 10p A Max 100% Tested Low Voltage Noise: 8n V/√Hz Max A Grade 100% Temperature Tested Offset Voltage Over Temp: 1m V Max Input Resistance: 1013Ω Very Low Input Capacitance: 1.5p F Voltage Gain: 1 Million Min Gain-Bandwidth Product: 4.2MHz Typ Guaranteed Specifications with ± 5V Supplies U APPLICATIO S s s s s s s Photocurrent Amplifiers Hydrophone Amplifiers High Sensitivity Piezoelectric Accelerometers Low Voltage and Current Noise Instrumentation Amplifier Front Ends Two and Three Op Amp Instrumentation Amplifiers Active Filters , LTC and LT are registered trademarks of Linear Technology Corporation. The LT®1793 achieves a new standard of excellence in noise performance for a JFET op amp. For the first time low voltage noise (6n V/√Hz) is simultaneously offered with extremely low current noise (0.8f A/√Hz), providing the lowest total noise for high impedance transducer applications. Unlike most JFET op amps, the very low input bias current (3p A typ) is maintained over the entire mon mode range which results in an extremely high input resistance (1013Ω). When bined with a very low input capacitance (1.5p F) an extremely high input impedance results, making the LT1793 the first choice for amplifying low level signals from high impedance transducers. The low input capacitance also assures high gain linearity when buffering AC signals from high impedance transducers. The LT1793 is unconditionally stable for gains of 1 or more, even with 1000p F capacitive loads. Other key Features are 250µV VOS and a voltage gain over 4 million. Each individual amplifier is 100% tested for voltage noise, slew rate (3.4V/µs) and gain-bandwidth product (4.2MHz). Specifications at ± 5V supply operation are also provided. For an even lower voltage noise please see the LT1792 data sheet. TYPICAL APPLICATIO Low Noise Light Sensor with DC Servo C1 2p...