LT1814 Datasheet | Linear Technology

.. LT1813/LT1814 Dual/Quad 3m A, 100MHz, 750V/µs Operational Amplifiers Features - - - - - - - - - - - - - - DESCRIPTIO U APPLICATIO S - - - - - - - 100MHz Gain Bandwidth Product 750V/µs Slew Rate 3.6m A Maximum Supply Current per Amplifier Tiny 3mm x 3mm x 0.8mm DFN Package 8n V/√Hz Input Noise Voltage Unity-Gain Stable 1.5m V Maximum Input Offset Voltage 4µA Maximum Input Bias Current 400n A Maximum Input Offset Current 40m A Minimum Output Current, VOUT = ±3V ±3.5V Minimum Input CMR, VS = ±5V 30ns Settling Time to 0.1%, 5V Step Specified at ±5V, Single 5V Supplies Operating Temperature Range: - 40°C to 85°C The LT®1813/LT1814 are dual and quad, low power, high speed, very high slew rate operational amplifiers with excellent DC performance. The LT1813/LT1814 feature reduced supply current, lower input offset voltage, lower input bias current and higher DC gain than other devices with parable bandwidth. The circuit topology is a voltage feedback amplifier with the slewing characteristics of a current feedback amplifier. The output drives a 100Ω load to ±3.5V with ±5V supplies. On a single 5V supply, the output swings from 1.1V to 3.9V with a 100Ω load connected to 2.5V. The amplifiers are stable with a 1000p F capacitive load making them useful in buffer and cable driver applications. The LT1813/LT1814 are manufactured on Linear Technology’s advanced low voltage plementary bipolar process. The LT1813 dual op amp is available in 8-pin MSOP, SO and 3mm x 3mm low profile (0.8mm) dual fine pitch leadless packages (DFN). The quad LT1814 is available in 14-pin SO and 16-pin SSOP packages. A single version, the LT1812, is also available (see separate data sheet). , LTC and LT are registered trademarks of Linear Technology Corporation. Active Filters Wideband Amplifiers Buffers Video Amplification munication Receivers Cable Drivers Data Acquisition Systems TYPICAL APPLICATIO Bandpass Filter with Independently Settable Gain, Q and f C R1 R C...