LT1995 Datasheet | Linear Technology

.. 32MHz, 1000V/µs Gain Selectable Amplifier Features - - - DESCRIPTIO - - - - - - - - - Internal Gain Setting Resistors Pin Configurable as a Difference Amplifier, Inverting and Noninverting Amplifier Difference Amplifier: Gain Range 1 to 7 CMRR > 65d B Noninverting Amplifier: Gain Range 1 to 8 Inverting Amplifier: Gain Range - 1 to - 7 Gain Error: <0.2% Slew Rate: 1000V/µs Bandwidth: 32MHz (Gain = 1) Op Amp Input Offset Voltage: 2.5m V Max Quiescent Current: 9m A Max Wide Supply Range: ±2.5V to ±15V Available in 10-Lead MSOP and 10-Lead (3mm × 3mm) DFN Packages The LT®1995 is a high speed, high slew rate, gain selectable amplifier with excellent DC performance. Gains from - 7 to 8 with a gain accuracy of 0.2% can be achieved using no external ponents. The device is particularly well suited for use as a difference amplifier, where the excellent resistor matching results in a typical mon mode rejection ratio of 79d B. The amplifier is a single gain stage design similar to the LT1363 and Features superb slewing and settling characteristics. Input offset of the internal operational amplifier is less than 2.5m V and the slew rate is 1000V/µs. The output can drive a 150Ω load to ±2.5V on ±5V supplies, making it useful in cable driver applications. The resistors have excellent matching, 0.2% maximum at room temperature and 0.3% from - 40°C to 85°C. The temperature coefficient of the resistors is typically - 30ppm/°C. The resistors are extremely linear with voltage, resulting in a gain nonlinearity of 10ppm. The LT1995 is fully specified at ±2.5V, ±5V and ±15V supplies and from - 40°C to 85°C. The device is available in space saving 10-lead MSOP and 10-Lead (3mm × 3mm) DFN packages. For a micropower precision amplifier with precision resistors, see the LT1991 and LT1996. , LTC and LT are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. U APPLICATIO S - - - - Instrumentation...