LT1996 Datasheet | Linear Technology

.. LT1996 Precision, 100µA Gain Selectable Amplifier Features - - DESCRIPTIO - - - - - - - - - - Pin Configurable as a Difference Amplifier, Inverting and Noninverting Amplifier Difference Amplifier Gain Range 9 to 117 CMRR >80d B Noninverting Amplifier Gain Range 0.008 to 118 Inverting Amplifier Gain Range - 0.08 to - 117 Gain Error: <0.05% Gain Drift: < 3ppm/°C Wide Supply Range: Single 2.7V to Split ±18V Micropower Operation: 100µA Supply Input Offset Voltage: 50µV (Max) Gain Bandwidth Product: 560k Hz Rail-to-Rail Output Space Saving 10-Lead MSOP and DFN Packages The LT®1996 bines a precision operational amplifier with eight precision resistors to form a one-chip solution for accurately amplifying voltages. Gains from - 117 to 118 with a gain accuracy of 0.05% can be achieved without any external ponents. The device is particularly well suited for use as a difference amplifier, where the excellent resistor matching results in a mon mode rejection ratio of greater than 80d B. The amplifier Features a 50µV maximum input offset voltage and a gain bandwidth product of 560k Hz. The device operates from any supply voltage from 2.7V to 36V and draws only 100µA supply current on a 5V supply. The output swings to within 40m V of either supply rail. The internal resistors have excellent matching characteristics; variation is 0.05% over temperature with a guaranteed matching temperature coefficent of less than 3ppm/°C. The resistors are also extremely stable over voltage, exhibiting a nonlinearity of less than 10ppm. The LT1996 is fully specified at 5V and ±15V supplies and from - 40°C to 85°C. The device is available in space saving 10-lead MSOP and DFN packages. For an amplifier with selectable gains from - 13 to 14, see the LT1991 data sheet. U APPLICATIO S - - - - Handheld Instrumentation Medical Instrumentation Strain Gauge Amplifiers Differential to Single-Ended Conversion , LTC and LT are registered trademarks of Linear Technology...