LT3680 Datasheet | Linear Technology

LT3680 36V, 3.5A, 2.4MHz Step-Down Switching Regulator with 75µA Quiescent Current Features - - - DESCRIPTION The LT®3680 is an adjustable frequency (200k Hz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 36V. A high efficiency 95m switch is included on the die along with a boost Schottky diode and the necessary oscillator, control, and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Low ripple Burst Mode operation maintains high efficiency at low output currents while keeping output ripple below 15m V in a typical application. In addition, the LT3680 can further enhance low output current efficiency by drawing bias current from the output when VOUT is above 3V. Shutdown reduces input supply current to less than 1μA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUT reaches 91% of the programmed output voltage. The LT3680 is available in 10-Pin MSOP and 3mm × 3mm DFN packages with exposed pads for low thermal resistance. , LT, LTC and LTM are registered trademarks of Linear Technology Corporation. Burst Mode is a registered trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. - - - - - - - - - - - Wide Input Voltage Range: 3.6V to 36V 3.5A Maximum Output Current Low Ripple (<15m VP-P) Burst Mode® Operation: IQ = 75μA at 12VIN to 3.3VOUT Adjustable Switching Frequency: 200k Hz to 2.4MHz Low Shutdown Current: IQ < 1μA Integrated Boost Diode Synchronizable Between 250k Hz to 2MHz Power Good Flag Saturating Switch Design: 95m On-Resistance 0.790V Feedback Reference Voltage Output Voltage: 0.79V to 30V Thermal Protection Soft-Start Capability Small 10-Pin Thermally Enhanced MSOP and (3mm × 3mm) DFN Packages APPLICATIONS Automotive Battery Regulation Power for Portable Products - Distributed Supply Regulation - Industrial Supplies...