LT3690 Datasheet | Linear Technology

.Data Sheet.co.kr Features n LT3690 36V, 4A, 1.5MHz Synchronous Step-Down Switching Regulator with 70µA Quiescent Current DESCRIPTION The LT®3690 is an adjustable frequency monolithic buck switching regulator that accepts input voltages up to 36V. A high efficiency 90mΩ switch is included on the device along with the boost diode and the necessary oscillator, control, and logic circuitry. The internal synchronous power switch of 30mΩ increases efficiency and eliminates the need for an external Schottky catch diode. Current mode topology is used for fast transient response and good loop stability. Shutdown reduces input supply current to less than 1µA. The low ripple Burst Mode maintains high efficiency at low output currents while keeping output ripple below 15m V in typical applications. The LT3690 Features robust operation and is easily configurable. Using a resistor divider on the UVLO pin provides a programmable undervoltage lockout. A power good flag signals when VOUT reaches 90% of the programmed output voltage. Protection circuitry senses the current in the power switches to protect the LT3690 against short-circuit conditions. Frequency foldback and thermal shutdown provide additional protection. The LT3690 is available in a 4mm × 6mm QFN package with exposed pads for low thermal resistance. L, LT, LTC, LTM, Linear Technology, the Linear logo and Burst Mode are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Wide Input Range: - Operation from 3.9V to 36V - Overvoltage Lockout Protects Circuits Through 60V Transients n 4A Maximum Output Current n Integrated 30mΩ N-Channel Synchronous Switch ® n Low Ripple (<15m V P-P) Burst Mode Operation: IQ = 70µA at 12VIN to 3.3VOUT n Programmable Input Undervoltage Lockout n 0.8V Feedback Reference Voltage n Output Voltage: 0.8V to 20V n Programmable and Synchronizable Oscillator (170k Hz to 1.5MHz) n Soft-Startup and Output Voltage...