LT6552 Datasheet | Linear Technology

LT6552 3.3V Single Supply Video Difference Amplifier Features s s s s s s s s s s s s DESCRIPTIO Differential or Single-Ended Gain Block Wide Supply Range 3V to 12.6V Output Swings Rail-to-Rail Input mon Mode Range Includes Ground 600V/µs Slew Rate - 3d B Bandwidth = 75MHz, AV = ±2 CMRR at 10MHz: >60d B Specified on 3.3V, 5V and ±5V Supplies High Output Drive: ±70m A Power Shutdown to 300µA Operating Temperature Range: - 40°C to 85°C Available in 8-Lead SO and Tiny 3mm x 3mm x 0.8mm DFN Packages The LT®6552 is a video difference amplifier optimized for low voltage single supply operation. This versatile amplifier Features unmitted high input impedance (+) and (- ) inputs and can be used in differential or single-ended configurations. A second set of inputs gives gain adjustment and DC control to the differential amplifier. On a single 3.3V supply, the input voltage range extends from ground to 1.3V and the output swings from ground to 2.9V while driving a 150Ω load. The LT6552 Features 75MHz - 3d B bandwidth, 600V/µs slew rate, and ±70m A output current making it ideal for driving cables directly. The LT6552 maintains its performance for supplies from 3V to 12.6V and is fully specified at 3.3V, 5V and ±5V supplies. The shutdown feature reduces power dissipation to less than 1m W and allows multiple amplifiers to drive the same cable. The LT6552 is available in the 8-lead SO package as well as a tiny, dual fine pitch leadless package (DFN). The device is specified over the mercial and industrial temperature ranges. , LTC and LT are registered trademarks of Linear Technology Corporation. U APPLICATIO S s s s s s s Differential to Single-Ended Conversion Video Line Driver Automotive Displays RGB Amplifiers Coaxial Cable Drivers Low Voltage High Speed Signal Processing TYPICAL APPLICATIO Cable Sense Amplifier for Loop Through Connections with DC Adjust MON MODE REJECTION RATIO (d B) Input Referred CMRR vs Frequency 100 90 80 70 60 50 40 30 20 10 100k 1 10...