LTC1042 Datasheet | Linear Technology

LTC1042 Window parator Features - Micropower 1.5µW (1 Sample/Second) - Wide Supply Range - 2.8V to 16V - High Accuracy Center Error ±1m V Max Width Error ±0.15% Max - Wide Input Voltage Range V+ to Ground - TTL Outputs with 5V Supply - Two Independent Ground-Referred Control Inputs - Small Size 8-Pin Mini DIP U APPLICATIO S - Fault Detectors - Go/No-Go Testing - Microprocessor Power Supply Monitor , LTC and LT are registered trademarks of Linear Technology Corporation. LTCMOS is a trademark of Linear Technology Corp. DESCRIPTIO The LTC®1042 is a monolithic CMOS window parator manufactured using Linear Technology’s enhanced LTCMOS™ silicon gate process. Two high impedance voltage inputs, CENTER and WIDTH/2, define the middle and width of the parison window. Whenever the input voltage, VIN, is inside the window the WITHIN WINDOW output is high. The ABOVE WINDOW output is high whenever VIN is above the window. By interchanging VIN and CENTER, the ABOVE WINDOW output bees BELOW WINDOW and is high if VIN is below the window. Sampling techniques provide high impedance voltage inputs that can mon mode to both supply rails (V+ and GND). An important feature of the inputs is their non-interaction. Also the device is effectively “chopper stabilized,” giving it extremely high accuracy over all conditions of temperature, power supply and input voltage range. Another benefit of the sampling techniques used to design the LTC1042 is the extremely low power consumption. When the device is strobed, it internally turns on the power to the parators, samples the inputs, stores the outputs in CMOS latches and then turns off power to the parators. This all happens in about 80µs. Average power can be made small, almost arbitrarily, by lowering the strobe rate. The device can be self-strobed using an external RC network or strobed externally by driving the OSC pin with a CMOS gate. TYPICAL APPLICATIO Battery-Powered Remote Freezer Alarm V+ IT 150k 3V TO 16V R1-...