LTC1069-7 Datasheet | Linear Technology

Linear Phase 8th Order Lowpass Filter Features n 8th Order, Linear Phase Filter in SO-8 Package n Raised Cosine Amplitude Response n - 43d B Attenuation at 2× f CUTOFF n Wideband Noise: 140μVRMS n Operates from Single 5V Supply to ±5V Power Supplies n Clock-Tunable to 200k Hz with ±5V Supplies n Clock-Tunable to 120k Hz with Single 5V Supply APPLICATIONS n Digital munication Filter n Antialiasing Filter with Linear Phase n Smoothing Filters DESCRIPTION The LTC®1069-7 is a monolithic, clock-tunable, linear phase, 8th order lowpass filter. The amplitude response of the filter approximates a raised cosine filter with an alpha of one. The gain at the cutoff frequency is - 3d B and the attenuation at twice the cutoff frequency is 43d B. The cutoff frequency of the LTC1069-7 is set by an external clock and is equal to the clock frequency divided by 25. The ratio of the internal sampling frequency to the cutoff frequency is 50:1 that is, the input signal is sampled twice per clock cycle to lower the risk of aliasing. The LTC1069-7 can be operated from a single 5V supply up to dual ±5V supplies. The gain and phase response of the LTC1069-7 can be used in digital munication systems where pulse shaping and channel bandwidth limiting must be carried out. Any system that requires an analog filter with linear phase and sharper roll off than conventional Bessel filters can use the LTC1069-7. The LTC1069-7 has a wide dynamic range. With ±5V supplies and an input range of 0.1VRMS to 2VRMS, the signal-to-(noise + THD) ratio is ≥ 60d B. The wideband noise of the LTC1069-7 is 140μVRMS. Unlikeother LTC1069-Xfilters, the typical passband gain of the LTC1069-7 is equal to - 1V/V. The LTC1069-7 is available in an SO-8 package. Other filter responses with lower power/speed specifications can be obtained. Please contact LTC Marketing. L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. TYPICAL APPLICATION Single 5V Supply, Linear Phase 100k Hz Lowpass...