LTC1150 Datasheet | Linear Technology

Features - High Voltage Operation: ±16V - No External ponents Required - Maximum Offset Voltage: 10µV - Maximum Offset Voltage Drift: 0.05µV/°C - Low Noise 1.8µVP-P (0.1Hz to 10Hz) - Minimum Voltage Gain: 135d B - Minimum PSRR: 120d B - Minimum CMRR: 110d B - Low Supply Current: 0.8m A - Single Supply Operation: 4.75V to 32V - Input mon Mode Range Includes Ground - 200µA Supply Current with Pin 1 Grounded - Typical Overload Recovery Time 20ms U APPLICATIO S - Strain Gauge Amplifiers - Electronic Scales - Medical Instrumentation - Thermocouple Amplifiers - High Resolution Data Acquisition ±15V Zero-Drift Operational Amplifier with Internal Capacitors DESCRIPTIO The LTC®1150 is a high-voltage, high-performance zero-drift operational amplifier. The two sample-and-hold capacitors usually required externally by other chopper amplifiers are integrated on-chip. Further, LTC’s proprietary high-voltage CMOS structures allow the LTC1150 to operate at up to 32V total supply voltage. The LTC1150 has an offset voltage of 0.5µV, drift of 0.01µV/°C, 0.1Hz to 10Hz input noise voltage of 1.8µVP-P and a typical voltage gain of 180d B. The slew rate of 3V/µs and a gain bandwidth product of 2.5MHz are achieved with 0.8m A of supply current. Overload recovery times from positive and negative saturation conditions are 3ms and 20ms, respectively. For applications demanding low power consumption, Pin 1 can be used to program the supply current. Pin 5 is an optional AC-coupled clock input, useful for synchronization. The LTC1150 is available in standard 8-lead, plastic dualin-line package, as well as an 8-lead SO package. The LTC1150 can be a plug-in replacement for most standard bipolar op amps with significant improvement in DC performance. , LTC and LT are registered trademarks of Linear Technology Corporation. TYPICAL...