LTC1530 Datasheet | Linear Technology

LTC1530 High Power Synchronous Switching Regulator Controller Features s s DESCRIPTIO s s s s s s s s s s High Power Buck Converter from 5V or 3.3V Main Power Adjustable Current Limit in S0-8 with Topside FET RDS(ON) Sensing No External Sense Resistor Required Hiccup Mode Current Limit Protection Adjustable, Fixed 1.9V, 2.5V, 2.8V and 3.3V Output All N-Channel MOSFET Synchronous Driver Excellent Output Regulation: ± 2% over Line, Load and Temperature Variations High Efficiency: Over 95% Possible Fast Transient Response Fixed 300k Hz Frequency Operation Internal Soft-Start Circuit Quiescent Current: 1m A, 45µA in Shutdown The LTC®1530 is a high power synchronous switching regulator controller optimized for 5V to 1.3V-3.5V output applications. Its synchronous switching architecture drives two external N-channel MOSFET devices to provide high efficiency. The LTC1530 contains a precision trimmed reference and feedback system that provides worst-case output voltage regulation of ± 2% over temperature, load current and line voltage shifts. Current limit circuitry senses the output current through the on-resistance of the topside N-channel MOSFET, providing an adjustable current limit without requiring an external low value sense resistor. The LTC1530 includes a fixed frequency PWM oscillator that free runs at 300k Hz, providing greater than 90% efficiency in converter designs from 1A to 20A of output current. Shutdown mode drops the LTC1530 supply current to 45µA. The LTC1530 is specified for mercial and industrial temperature ranges and is available in the S0-8 package. , LTC and LT are registered trademarks of Linear Technology Corporation. Pentium is a registered trademark of Intel Corp. AMD-K6 is a registered trademark of Advanced Micro Devices, Inc. U APPLICATIO S s s Power Supply for Pentium® II, AMD-K6®-2, SPARC, ALPHA and PA-RISC Microprocessors High Power 5V to 1.3V-3.5V Regulators TYPICAL APPLICATIO 0.1µF VIN 5V MBR0530T1 MBR0530T1 2.7k + + 10µF...