LTC1708-PG Datasheet | Linear Technology

Final Electrical Specifications LTC1708-PG Dual Adjustable 5-Bit VID High Efficiency, 2-Phase Current Mode Synchronous Buck Regulator Controller February 2000 Features s s s s s s s s s s s s s s s s s DESCRIPTIO U APPLICATIO S s s Out-of-Phase Controllers Reduce Input Capacitance and Power Supply Induced Noise OPTI-LOOPTM pensation Minimizes COUT Power Good Output Monitors Both Outputs 5-Bit Mobile VID Control, VOUT: 0.9V to 2.0V Dual N-Channel MOSFET Synchronous Drive ±1% Output Voltage Accuracy DC Programmed Fixed Frequency 150k Hz to 300k Hz Wide VIN Range: 3.5V to 36V Operation Very Low Dropout Operation: 99% Duty Cycle Adjustable Soft-Start Current Ramping Foldback Output Current Limiting Latched Short-Circuit Shutdown with Defeat Option Output Overvoltage Protection Remote Output Voltage Sense Low Shutdown Current: 20µA 5V and 3.3V Standby Regulators Selectable Constant Frequency, Burst Mode TM and Continuous Operation The LTC®1708 is a dual adjustable 5-bit VID programmable step-down switching regulator controller that drives all N-Channel power MOSFET stages. A constant frequency current mode architecture allows adjustment of the frequency up to 300k Hz. Power loss and noise due to the ESR of the input capacitance are minimized by operating the two main controller output stages out of phase. OPTI-LOOP pensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The precision 0.8V reference is patible with future microprocessor generations, and a wide 3.5V to 30V (36V maximum) input supply range that enpasses all battery chemistries. A power good output indicates when the output voltages are within 7.5% of their programmed value. A RUN/SS pin for each controller provides both soft-start and an optional timed, short-circuit shutdown. Other protection Features include: internal foldback current limiting and an output overvoltage crowbar. The force continuous control pin (FCB) can be used to...