LTC2923 Datasheet | Linear Technology

LTC2923 Power Supply Tracking Controller .. Features - - - - - - - - - DESCRIPTIO U APPLICATIO S - - - - Flexible Power Supply Tracking Tracks Both Up and Down Power Supply Sequencing Supply Stability is Not Affected Controls Two Supplies Without Series FETs Controls a Third Supply With a Series FET Adjustable Ramp Rates Electronic Circuit Breaker Available in 10-Lead MS and 12-Lead (4mm × 3mm) DFN Packages The LTC®2923 provides a simple solution to power supply tracking and sequencing requirements. By selecting a few resistors, the supplies can be configured to ramp-up and ramp-down together or with voltage offsets, time delays or different ramp rates. By introducing currents into the feedback nodes of two independent switching regulators, the LTC2923 causes their outputs to track without inserting any pass element losses. Because the currents are controlled in an openloop manner, the LTC2923 does not affect the transient response or stability of the supplies. Furthermore, it presents a high impedance when power-up is plete, effectively removing it from the DC/DC circuit. For systems that require a third supply, one supply can be controlled with a series FET. This optional series FET can also control a supply that does not allow direct access to its feedback resistors (e.g., a power module) or a supply whose output cannot be forced to ground (e.g., a 3-terminal linear regulator). When the FET is used, an electronic circuit breaker provides protection from short-circuit conditions. VCORE and VI/O Supply Tracking Microprocessor, DSP and FPGA Supplies Servers munication Systems , LTC and LT are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Patents Pending. TYPICAL APPLICATIO VIN 3.3V Q1 10n F 3.3V 1V/DIV VIN IN DC/DC FB = 1.235V 16.5k VIN TRACK1 13k 887k TRACK2 412k GND 887k 412k 2923 TA01 138k 100k VCC ON GATE RAMP FB1 1.8V LTC2923 35.7k RAMPBUF...