LTC3407 Datasheet | Linear Technology

Features n High Efficiency: Up to 96% n Very Low Quiescent Current: Only 40μA n 1.5MHz Constant Frequency Operation n High Switch Current: 1A on Each Channel n No Schottky Diodes Required n Low RDS(ON) Internal Switches: 0.35Ω n Current Mode Operation for Excellent Line and Load Transient Response n Short-Circuit Protected n Low Dropout Operation: 100% Duty Cycle n Ultralow Shutdown Current: IQ < 1μA n Output Voltages from 5V down to 0.6V n Power-On Reset Output n Externally Synchronizable Oscillator n Small Thermally Enhanced MSOP and 3mm × 3mm DFN Packages APPLICATIONS n PDAs/Palmtop PCs n Digital Cameras n Cellular Phones n Portable Media Players n PC Cards n Wireless and DSL Modems Dual Synchronous, 600m A, 1.5MHz Step-Down DC/DC Regulator DESCRIPTION The LTC®3407 is a dual, constant frequency, synchronous step down DC/DC converter. Intended for low power applications, it operates from 2.5V to 5.5V input voltage range and has a constant 1.5MHz switching frequency, allowing the use of tiny, low cost capacitors and inductors 2mm or less in height. Each output voltage is adjustable from 0.6V to 5V. Internal synchronous 0.35Ω, 1A power switches provide high efficiency without the need for external Schottky diodes. A user selectable mode input is provided to allow the user to trade-off ripple noise for low power efficiency. Burst Mode® operation provides high efficiency at light loads, while pulse-skipping mode provides low ripple noise at light loads. To further maximize battery life, the P-channel MOSFETs are turned on continuously in dropout (100% duty cycle), and both channels draw a total quiescent current of only 40μA. In shutdown, the device draws <1μA. L, LT, LTC, LTM, Burst Mode, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. TYPICAL APPLICATION VIN = 2.5V TO 5.5V C1 10μF VOUT2 = 2.5V AT 600m A L2 2.2μH C5, 22p F RUN2 VIN...