LTC3425 Datasheet | Linear Technology

Features s s s LTC3425 5A, 8MHz, 4-Phase Synchronous Step-Up DC/DC Converter DESCRIPTIO .. s s s s s s s s s s s s s U APPLICATIO S s s s High Efficiency: Up to 95% Up to 3A Continuous Output Current 4-Phase Operation for Low Output Ripple and Tiny Solution Size Output Disconnect and Inrush Current Limiting Very Low Quiescent Current: 12µA 0.5V to 4.5V Input Range 2.4V to 5.25V Adjustable Output Voltage Adjustable Current Limit Adjustable, Fixed Frequency Operation from 100k Hz to 2MHz per Phase Synchronizable Oscillator with Sync Output Internal Synchronous Rectifiers Manual or Automatic Burst Mode® Operation Power Good parator <1µA Shutdown Current Antiringing Control 5mm × 5mm Thermally Enhanced QFN Package The LTC®3425 is a synchronous, 4-phase boost converter with output disconnect capable of operation below 1V input. It includes four N-channel MOSFET switches and four P-channel synchronous rectifiers for an effective RDS(ON) of 0.045Ω and 0.05Ω, respectively. 4-phase operation greatly reduces peak inductor currents, and capacitor ripple current, and increases effective switching frequency, minimizing inductor and capacitor sizes. True output disconnect eliminates inrush current and allows zero load current in shutdown. External Schottky diodes are not required in most applications (VOUT < 4.3V). Power saving Burst Mode operation can be user controlled or left in automatic mode. Other Features include 1µA shutdown current, programmable frequency with sync in and out, programmable soft-start, antiringing control, thermal shutdown, adjustable current limit, reference output and power good parator. The LTC3425 is available in a small, thermally enhanced 32-pin QFN package. , LTC and LT are registered trademarks of Linear Technology Corporation. Burst Mode is a registered trademark of Linear Technology Corporation. Handheld puters Point-of-Load Regulators 3.3V to 5V Conversion TYPICAL APPLICATIO VIN 2V TO 3V 2.2µF 2.7µH 2.7µH 2.7µ...