LTC4054-4.2 Datasheet | Linear Technology

LTC4054-4.2/LTC4054X-4.2 Standalone Linear Li-Ion Battery Charger with Thermal Regulation in Thin SOT Features s Programmable Charge Current Up to 800m A s No MOSFET, Sense Resistor or Blocking Diode Required s plete Linear Charger in Thin SOTTM Package for Single Cell Lithium-Ion Batteries s Constant-Current/Constant-Voltage Operation with Thermal Regulation- to Maximize Charge Rate Without Risk of Overheating s Charges Single Cell Li-Ion Batteries Directly from USB Port s Preset 4.2V Charge Voltage with ±1% Accuracy s Charge Current Monitor Output for Gas Gauging- s Automatic Recharge s Charge Status Output Pin s C/10 Charge Termination s 25µA Supply Current in Shutdown s 2.9V Trickle Charge Threshold (LTC4054) s Available Without Trickle Charge (LTC4054X) s Soft-Start Limits Inrush Current s Available in 5-Lead SOT-23 Package U APPLICATIO S s Cellular Telephones, PDAs, MP3 Players s Charging Docks and Cradles s Bluetooth Applications DESCRIPTIO The LTC®4054 is a plete constant-current/constantvoltage linear charger for single cell lithium-ion batteries. Its Thin SOT package and low external ponent count make the LTC4054 ideally suited for portable applications. Furthermore, the LTC4054 is specifically designed to work within USB power specifications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The LTC4054 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the LTC4054 automatically enters a low current state, dropping the battery drain current to less than 2µA. The LTC4054 can be put into...