LTC4061-4.4 Datasheet | Linear Technology

- - - - - - - - - - - - Charge Current Programmable Up to 1A Charges Single-Cell Li-Ion Batteries Directly from USB Port Preset 4.375V Float Voltage with ±0.4% Accuracy Thermistor Input for Temperature Qualified Charging Input Supply Present Logic Output Thermal Regulation Maximizes Charge Rate Without Risk of Overheating Programmable Charge Current Detection/ Termination Programmable Charge Termination Timer Smart Pulsing Error Feature Smart Start TM Prolongs Battery Life 20µA Charger Quiescent Current in Shutdown Available in a Low Profile (0.75mm) 10-Lead (3mm × 3mm) DFN Package The LTC® 4061-4.4 is a full-featured, flexible, standalone linear charger for single-cell 4.375V Lithium-Ion batteries. It is capable of operating within USB power specifications. Both programmable time and programmable current based termination schemes are available. Furthermore, the CHRG open-drain status pin can be programmed to indicate the battery charge state according to the needs of the application. Additional safety Features designed to maximize battery lifetime and reliability include NTC battery temperature sensing and the Smart Start charging algorithm. No external sense resistor or external blocking diode is required for charging due to the internal MOSFET architecture. Internal thermal feedback regulates the charge current to maintain a constant die temperature during high power operation or high ambient temperature conditions. The charge current is programmed with an external resistor. With power applied, the LTC4061-4.4 can be put into shutdown mode to reduce the supply current to 20µA and the battery drain current to less than 5µA. Other Features include smart recharge, USB C/5 current programming input, undervoltage lockout and AC Present logic output. , LT, LTC and LTM are registered trademarks of Linear Technology Corporation. Smart Start is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S....