LTC4100 Datasheet | Linear Technology

Features n Single Chip Smart Battery Charger Controller n 100% pliant (Rev. 1.1) SMBus Support Allows for Operation with or without Host n SMBus Accelerator Improves SMBus Timing n Wide Output Voltage Range: 3.5V to 26V n Hardware Interrupt and SMBAlert Response Eliminate Interrupt Polling n High Efficiency Synchronous Buck Charger n0.5V Dropout Voltage; Maximum Duty Cycle > 98% n AC Adapter Current Limit Maximizes Charge Rate n±0.8% Voltage Accuracy; ±4% Current Accuracy n Up to 4A Charging Current Capability n10-Bit DAC for Charge Current Programming n11-Bit DAC for Charger Voltage Programming n User-Selectable Overvoltage and Overcurrent Limits n High Noise Immunity Safety Signal Sensor n Available in a 24-Pin SSOP Package Applications n Portable Instruments and puters n Data Storage Systems and Battery Backup Servers L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and Power Path is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S. Patents including 6650174 and 5723970. LTC4100 Smart Battery Charger Controller Description The LTC®4100 Smart Battery Charger is a single chip charging solution that dramatically simplifies construction of an SBS pliant system. The LTC4100 implements a Level 2 charger function whereby the charger can be programmed by the battery or by the host. A Safety Signal on the battery being charged is monitored for temperature, connectivity and battery type information. The SMBus interface remains alive when the AC power adapter is removed and responds to all SMBus activity directed to it, including Safety Signal status (via the Charger Status mand). The charger also provides an interrupt to the host whenever a status change is detected (e.g., battery removal, AC adapter connection). Charging current and voltage are restricted to chemistryspecific limits for improved system safety and reliability. Limits...