LTC4367 Datasheet | Linear Technology

Features 100V Overvoltage, Undervoltage and Reverse Supply Protection Controller DESCRIPTION n Wide Operating Voltage Range: 2.5V to 60V n Overvoltage Protection to 100V n Reverse Supply Protection to - 40V n LTC4367: Blocks 50Hz and 60Hz AC Power n LTC4367: 32ms Recovery from Fault n LTC4367-1: Fast 500µs Recovery from Fault n No Input Capacitor or TVS Required for Most Applications n Adjustable Undervoltage and Overvoltage Thresholds n Controls Back-to-Back N-Channel MOSFETs n Low Operating Current: 70µA n Low Shutdown Current: 5µA n 8-Pin MSOP and 3mm × 3mm DFN Packages n AEC-Q100 Qualified for Automotive Applications APPLICATIONS n Portable Instrumentation n Industrial Automation n Automotive Surge (Load Dump) Protection n Network Equipment The LTC®4367 protects applications where power supply input voltages may be too high, too low or even negative. It does this by controlling the gate voltages of a pair of external N-channel MOSFETs to ensure that the output stays within a safe operating range.The LTC4367 withstands voltages between - 40V and 100V and has an operating range of 2.5V to 60V, while consuming only 70µA in normal operation. Two parator inputs allow configuration of the overvoltage (OV) and undervoltage (UV) set points using an external resistive divider. A shutdown pin provides external control for enabling and disabling the MOSFETs as well as placing the device in a low current shutdown state. A fault output indicates that the GATE pin is pulling low when the part is in shutdown or the input voltage is outside the UV and OV set points. The LTC4367 has a 32ms turn-on delay that debounces live connections and blocks 50Hz to 60Hz AC power. For fast recovery after faults, the LTC4367-1 has a reduced turn-on delay of 500µs. All registered trademarks and trademarks are the property of their respective owners. TYPICAL APPLICATION 24V Automotive Application with +100V, - 40V Protection Si7942 VOUT 24V 2A Load Protected from...