LTC4419 Datasheet | Linear Technology

LTC4419 18V Dual Input Micropower Power Path Prioritizer Features DESCRIPTION nn Selects Highest Priority Valid Supply from Two Inputs nn Wide 1.8V to 18V Operating Range nn Internal Dual 2Ω, 0.5A Switches nn Low 3.6µA Operating Current nn Low 320n A V2 Current When V1 Connected to OUT nn Blocks Reverse and Cross Conduction Currents nn Reverse Supply Protection to - 15V nn V2 Freshness Seal/Ship Mode nn ±1.5% Accurate Adjustable Switchover Threshold nn Two Auxiliary ±2.3% Accurate Voltage parators nn Overcurrent and Thermal Protection nn Thermally Enhanced 10-Pin 3mm × 3mm DFN and 12-Lead Exposed Pad MSOP Packages APPLICATIONS nn Low Power Battery Backup nn Portable Equipment nn Point-of-Sale (POS) Equipment The LTC®4419 is a dual input monolithic Power Path™ prioritizer with low operating current, that provides backup switchover for keeping critical circuitry alive during brown out and power loss conditions. Unlike diode-OR products, little current is drawn from the inactive supply even if its voltage is greater than the active supply. Internal 2Ω, current limited PMOS switches provide power path selection from a primary input (V1) or a backup input (V2) to the output. An adjustable voltage monitor set via an external resistive divider provides flexibility in setting the V1 to V2 switchover threshold. When primary input V1 drops, the ADJ monitor input causes OUT to be switched to V2. Fast non-overlap switchover circuitry prevents both reverse and cross conduction while minimizing output droop. The LTC4419 has two auxiliary parators with opendrain outputs that provide flexible voltage monitoring. The V2ON output indicates if V2 is powering OUT. Freshness seal mode prevents V2 battery discharge during storage or shipment. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and Power Path and Thin SOT are trademarks of Analog Devices, Inc. All other trademarks are the property of their respective owners. TYPICAL APPLICATION 5V WALL...