LTC5800-IPM Datasheet | Linear Technology

LTC5800-IPM Smart Mesh IP Node 2.4GHz 802.15.4e Wireless Mote-on-Chip Network Features nn plete Radio Transceiver, Embedded Processor, and Networking Software for Forming a Self-Healing Mesh Network nn Smart Mesh® Networks Incorporate: nn Time Synchronized Network-Wide Scheduling nn Per Transmission Frequency Hopping nn Redundant Spatially Diverse Topologies nn Network-Wide Reliability and Power Optimization nn NIST Certified Security nn Smart Mesh Networks Deliver nn >99.999% Network Reliability Achieved in the Most Challenging RF Environments nn Sub 50µA Routing Nodes nn pliant to 6Lo WPAN Internet Protocol (IP) and IEEE 802.15.4e Standards LTC5800-IPM Features nn Industry-Leading Low Power Radio Technology nn 4.5m A to Receive a Packet nn 9.7m A to Transmit at 8d Bm nn PCB Module Versions Available (LTP5901/ LTP5902-IPM) with RF Modular Certifications nn 2.4GHz, IEEE 802.15.4e System-on-Chip nn 72-Pin 10mm × 10mm QFN Package nn Micrium µCOS-II Real Time Operating System based On-Chip Software Development Kit Description Smart Mesh IP™ wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes. The LTC®5800-IPM is the IP mote product in the Eterna®- family of IEEE 802.15.4e System-on-Chip (So C) solutions, featuring a highlyintegrated, low power radio design by Dust Networks® as well as an ARM Cortex-M3 32-bit microprocessor running Dust’s embedded Smart Mesh IP networking software. The LTC5800-IPM So C Features an on-chip power amplifier (PA) and transceiver, requiring only power supply decoupling, crystals, and antenna with matching circuitry to create a plete wireless node. With Dust’s time-synchronized Smart Mesh IP networks, all motes in the network may route, source or terminate data, while providing many years of battery powered operation. The Smart Mesh IP software provided with the LTC5800-IPM is fully tested and validated, and is readily configured via a software Application Programming...