LTC5800-WHM Datasheet | Linear Technology

LTC5800-WHM Smart Mesh Wireless HART Node Wireless Mote Network Features plete Radio Transceiver, Embedded Processor, and Networking Software for Forming a Self-Healing Mesh Network n pliant to Wireless HART (IEC62591) Standard n Smart Mesh® Networks Incorporate: n Time Synchronized Network-Wide Scheduling n Per Transmission Frequency Hopping n Redundant Spatially Diverse Topologies n Network-Wide Reliability and Power Optimization n NIST Certified Security n Smart Mesh Networks Deliver: n>99.999% Network Reliability Achieved in the Most Challenging Dynamic RF Environments Often Found in Industrial Applications n Sub 50µA Routing Nodes n Description Smart Mesh Wireless HART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. The LTC®5800-WHM is the Wireless HART Mote-on-Chip™ integrated circuit in the Eterna®- family of IEEE 802.15.4 System-on-Chip (So C) solutions, featuring a highly integrated, low power radio design by Dust Networks® as well as an ARM Cortex-M3 32bit microprocessor running Dust’s embedded Smart Mesh Wireless HART networking software. The LTC5800-WHM So C Features an on-chip power amplifier (PA) and transceiver, requiring only power supply decoupling, crystals, and antenna with matching circuitry to create a plete wireless node. With Dust’s time-synchronized Wireless HART networks all motes in the network may route, source or terminate data while providing many years of battery powered operation. The Smart Mesh Wireless HART software provided with the LTC5800-WHM is fully tested and validated, and is readily configured via a software Application Programming Interface. Smart Mesh Wireless HART motes deliver a highly flexible network with proven reliability and low power performance in an easy-to-integrate platform. L, LT, LTC, LTM, Linear Technology, the Linear logo, Dust, Dust Networks, Smart Mesh and Eterna are registered trademarks and LTP, the Dust Networks logo and Mote-on-Chip are...