LTC6400-8 Datasheet | Linear Technology

.. LTC6400-8 2.2GHz Low Noise, Low Distortion Differential ADC Driver for DC-300MHz DESCRIPTION The LTC®6400-8 is a high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose broadband gain block. The LTC6400-8 is easy to use, with minimal support circuitry required. The output mon mode voltage is set using an external pin, independent of the inputs, which eliminates the need for transformers or AC-coupling capacitors in many applications. The gain is internally fixed at 8d B (2.5V/V). The LTC6400-8 saves space and power pared to alternative solutions using IF gain blocks and transformers. The LTC6400-8 is packaged in a pact 16-lead 3mm × 3mm QFN package and operates over the - 40°C to 85°C temperature range. L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Features n n n n n n n n n n n n n n 2.2GHz - 3d B Bandwidth Fixed Gain of 2.5V/V (8d B) - 99d Bc IMD3 at 70MHz (Equivalent OIP3 = 53.4d Bm) - 61d Bc IMD3 at 300MHz (Equivalent OIP3 = 34.8d Bm) 1n V/√Hz Internal Op Amp Noise 7.6d B Noise Figure Differential Inputs and Outputs 400Ω Input Impedance 2.85V to 3.5V Supply Voltage 85m A Supply Current (255m W) 1V to 1.6V Output mon Mode, Adjustable DC- or AC-Coupled Operation Max Differential Output Swing 4.8VP-P Small 16-Lead 3mm × 3mm × 0.75mm QFN Package APPLICATIONS n n n n n Differential ADC Driver Differential Driver/Receiver Single Ended to Differential Conversion IF Sampling Receivers SAW Filter Interfacing TYPICAL APPLICATION 3.3V 3.3V 70 C2 0.1μF C1 1000p F C3 0.1μF VIN R1 59.0Ω C4 0.1μF - IN R2 27.4Ω V- 1.25V C5 0.1μF R3 100Ω V+ +IN +OUT LTC6400-8 - OUT VOCM L1 RS2 24n H 15Ω COILCRAFT 0603CS CF1 33p F RS4 10Ω CF3 33p F RS1 15Ω CF2 33p F OUTPUT IP3 (d Bm) RS3 10Ω 60 50 40 30 20...